Use the right IP/address with the correct directory and I get to control TP2 (on the DMPS3). On the DMPS3, the INs and OUTs (Digital, Analog, Serial) match with the touch panel. From there, in the Pro3 program, ALL the outs of the Xpanel (Digital, Analog, Serial) go into the "IN" of a "3 Series TCP/IP Ethernet Intersystem Communication" device and vice versa. The Pro3 program contains the XPanel device and IPIDs match. Copy the generated directory contents into a separate directory on the Pro3. Enter appropriate Host and IPId into the vtp xpanel file. There are more but they are irrelevant to this issue.ĭone: Convert save file for TP2 into "XPANEL 2.0(Web) Smart Graphics". On the subnet is a DMPS3, and two touch panels one (TP1) for the program on the Pro3 and the other (TP2) for the program in the DMPS3. System: Establishment LAN drop into the LAN in on a Pro3, everything else plugged into the control subnet (through a POE-16). Big post with lots of words so that it can be hit by google searches.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |